Full Camper Van Electrical Wiring Conversion Kit With Inverter

New

Full electrical 12V & 240V camper conversion kit with 1000W inverter

A complete tailor made electrical kit for your camper conversion

Covers both 12V wiring and a 240V hook up with dual charging

  • Includes split charging, hook up, control panel & wiring, power inverter
  • Use 240V equipment even without hook up, up to 1000W
  • Complete with clear, comprehensive, pictographic instructions

57533 Items

£ 304.99

Full electrical 12V & 240V camper conversion kit with 1000W inverter

 ..

A complete tailor made electrical wiring kit for your camper conversion

Covers both 12V wiring looms and a 240V hook up with dual charging

 ..

  • Includes split charging system, mains hook up, control panel & wiring, power inverter
  • Use 240V equipment even without hook up, up to 1000W
  • Complete with clear, comprehensive, pictographic walkthrough instructions
  • All cables custom made to suit your specific conversion
  • Expert technical support and aftersales care provided
  • Includes both mains and split charging for the leisure battery

 ..

Please note; Kits are assembled to order and therefore are subject to a lead time of 7-14 days

..

This standard kit is not suitable for vehicles fitted with variable voltage smart alternator charging systems. For vehicles with smart alternators select the CTEK charger option above. Not sure if you need a smart alternator wiring kit. Check out our blog for a simple test. 

Kit Contents

Within this kit, you will receive;

  • ·       100A ignition triggered split charge system made to fit any battery location (voltage sensing split charge & CTEK DC DC charger upgrade available)
  • ·       1000W modified sine wave 12-240V power inverter
  • ·       Leisure battery earth lead
  • ·       6-way pre-wired leisure battery fuse box
  • ·       Common earth block
  • ·       Fully automatic 10A Intelligent mains leisure battery charger
  • ·       Mains consumer unit (pre-wired with cables to fit your socket locations)
  • ·       Surface mounted inlet socket (flush mounted sockets available)
  • ·       1 x switched white single socket & back box
  • ·       1 x switched white double socket & back box (brushed silver, gloss black or black nickel double sockets available)
  • ·       Blue 2.5mm2 3 core arctic mains flex
  • ·       Mains earth cable
  • ·       Cable clips and ties (to keep your install tidy)
  • ·       5 switch panel with built in voltmeter, dual USB and 12V socket
  • ·       Custom built wiring looms for;
    • o   Fridge
    • o   Sink and stove
    • o   Roof/mood lighting
    • o   12V TV
    • o   Radio, etc.

 ..

Product description

Each kit is custom made to suit your individual conversion, how we normally do this is by giving you a quick call after the purchase to run through what you’d like wired in and where you’d like to put it, so please be sure to leave a number when purchasing the kit.

Please note:  As we design the wiring looms, these looms will have ample cable to reach each component, allowing for sensible routing, we do take the shortest practical route. If you would like a specific cable routing, this is not a problem at all but please do specify when we discuss the layout. 

Our comprehensive electrical conversion kit allows you to simply install both 12V and mains 240V systems into your campervan. We will supply all of the wiring, fusing, switching, charging, cabling you need to get powered up.

When parked up at a camp site, simply hook up your vehicle to the mains to use the 240V directly through the consumer unit and sockets. Meanwhile the intelligent leisure battery charger will maintain your battery’s charge.

Your leisure battery will also be charged from engine automatically whilst driving through the heavy duty split charge system.  

..

Component descriptions

1000W power inverter

Our very own Rayne Automotive modified sine wave inverter, as with all of our equipment, this will be wired with the leads to mount in your desired location within the van using heavy duty 16mm cable. The inverter will convert 12V DC to AC 240V allowing you to charge your camera, phone, laptop etc. It comes with a USB power output as well as 2 x UK sockets and is switched.

Mains consumer unit

These enclosures are a high quality versatile unit with a RCD and 2 MCBs (6A & 16A) that is perfect for motorhomes and camper vans. Just tell us where you want your inlet and output sockets and we will wire the consumer unit up so all you need to do is wire the plug, (don't worry, there's instructions for this too..) 

Intelligent battery charger

Ideal for battery maintenance, suitable for continuous use, will charge up to 10A when required.

No customer comments for the moment.

Write a review

Full Camper Van Electrical Wiring Conversion Kit With Inverter

Full Camper Van Electrical Wiring Conversion Kit With Inverter

Full electrical 12V & 240V camper conversion kit with 1000W inverter

A complete tailor made electrical kit for your camper conversion

Covers both 12V wiring and a 240V hook up with dual charging

  • Includes split charging, hook up, control panel & wiring, power inverter
  • Use 240V equipment even without hook up, up to 1000W
  • Complete with clear, comprehensive, pictographic instructions

Write a review

Customers who bought this product also bought: