PMS3 Campervan/Motorhome Wiring Kit with Voltage Sensing Split Charge
  • PMS3 Campervan/Motorhome Wiring Kit with Voltage Sensing Split Charge
  • PMS3 Campervan/Motorhome Wiring Kit with Voltage Sensing Split Charge

PMS3 T4/T5 Campervan/Motorhome Wiring Kit with Voltage Sensing Split Charge

£104.16

Making installing a PMS 3 unit as fast and as simple as possible.

·       Please note: this kit does not include the PMS 3 unit, just the wiring kit. (Unit pictured for reference only).

·       A fast, simple, high quality kit for installing a PMS 3 power management system.

·       Complete with a voltage sensing split charge system this wiring loom is perfect for saving time, money and hassle when converting campervans, simply plug it in, connect to your components and everything will be up and running. 

Quantity

PMS3 Wiring Kit with Voltage Sensing Split Charge

 

Making installing a PMS 3 unit as fast and as simple as possible.

·       Please note: this kit does not include the PMS 3 unit, just the wiring kit. (Unit pictured for reference only).

·       A fast, simple, high quality kit for installing a PMS 3 power management system.

·        Complete with a voltage sensing split charge system

·        Comes with all of the wiring looms for converting a standard T4/5 layout van (as in the schematic above).

 

Kit Contents

Within this kit, you will receive;

        2.5mm2 wiring loom for a compressor fridge located just behind the driver’s seat

        Series wiring loom for connecting a water pump with inline tap switch

        Harness for installing a 12V television

        Wiring harness for hob ignition

        Power loom from the leisure battery fuses to the PMS unit

        Lighting loom, for a switch (not supplied) located behind the passenger sliding door and then running up to 6 LED lights in the roof (not supplied).

        5M 1.5mm2 arctic flexible 240V 3 core cable

        Voltage sensing split charge kit to locate the leisure battery by the off-side rear wheel arch

 

 

 

Voltage sensing split charge system

 

         Designed to mount the leisure battery by the offside rear wheel arch.

         Simple 4 connection installation.

         A complete tailor made 140A voltage sensing split charge system, fused to 100A and made in heavy duty 16mm2 cable.

         Includes both positive and negative battery terminals. 

9

Download

PMS3 Kit Instructions

PMS3 wiring kit for transporters and small vans. Fitting instructions

Download (978.01k)

T5 VSR Instructions

T5 Transporter voltage sensing split charge kit fitting instructions

Download (543.02k)