top of page
1-4 day delivery on stock items
1-2 Week lead time on full wiring kits

Victron Energy Smart Lithium Leisure Battery 12.8V 200Ah BMS Kit


Lightweight, high powered leisure battery for long-lasting power. Supplied with a battery management system (BMS) unit for a safe, easy installation that will help maximise your battery life.


  • Non-stock item, approx. lead time 2 weeks
  • 3-Year warranty
  • Approximately 2560W/h of usable power
  • Up to 5000 cycles at 50% DoD, 2500 cycles at 80% DoD
  • M8 bolts for connecting your battery leads
  • Supplied with a choice of BMS system


Product description


Ve.Bus BMS/battery protects

Use this unit if you're adding a Victron Inverter/Charger. it will control the battery loads and charges and communicate with the Inverter/Charger.


Supplied with 2 x Victron battery protect for the loads and charges. Available in 65A or 100A. (non-Victron Inverters can't be connected to the battery protect, use a remote switch for this). (The size of the battery protect should exceed all of your solar/alternator charging combined or all of your non-inverter loads combined, whichever is greater).


We will also supply the kit with the relevant cabling to connect the battery protects to the leisure battery (50cm) and the cabling for the VeBus BMS.


If you're charging from your alternator, use a Victron Orion Smart for this. 


This setup is perfect for larger systems and it's what we use for induction cooking and many of our other big setups. 


Smart BMS CL 12/100

The Smart BMS CL 12/100 is a Battery Management system for Victron lithium-iron-phosphate (LiFePO4) Smart Batteries. It has been specifically designed for 12V systems with a 12V alternator. There is no need for a battery to battery charger when using one of these.


Supplied with the cables to connect the BMS to the leisure battery and set to charge from the alternator at 25A. (please check with your manufacturer that this charge rate is okay). 


Ideal if you're not using an inverter/charger or in 12V only systems. 




Lithium-iron-phosphate (LiFePO4 or LFP) is the safest of the mainstream li-ion battery types. The nominal voltage of a LFP cell is 3,2V (lead-acid: 2V/cell). A 12,8V LFP battery, therefore, consists of 4 cells connected in series.


A lead-acid battery will fail prematurely due to sulfation:
• If it operates in deficit mode during long periods of time (i.e. if the battery is rarely, or never at all,
fully charged).
• If it is left partially charged or worse, fully discharged (yacht or mobile home during wintertime).
A lithium battery does not need to be fully charged. Service life even slightly improves in the case of partial charge instead of a full charge. This is a major advantage of LFP compared to lead-acid.
Other advantages are the wide operating temperature range, excellent cycling performance, low internal resistance and high efficiency (see below). LiFePO4 is the chemistry of choice for demanding applications.

Size and weight
Saves up to 70% in space
Saves up to 70% in weight

LFP batteries are expensive when compared to lead-acid. But in demanding applications, the high initial cost will be more than compensated by longer service life, superior reliability and excellent efficiency.

With Bluetooth cell voltages, temperature and alarm status can be monitored. Very useful to localize a (potential) problem, such as cell imbalance.


BrandVictron Energy
Voltage12.8 Volts
Capacity (C20)200Ah
Length321 mm
Width152 mm
Height inc. terms237 mm
Guarantee3 Years

200Ah Victron Lithium LiFePO4 Leisure battery and BMS Kit

PriceFrom £2,065.45
    • 1 x 200Ah LiFePO4 Lithium battery 
    • 1 x BMS kit (options below)
    • VE.Bus BMS kit 65A includes 1 x VE.Bus, 2 x 65A Battery protect, 1 x 50cm fused battery protect cabling kit, 1 x VE.Bus wiring kit. 
    • or VE.Bus BMS kit 100A as above but with 100A battery protects. 
    • or Smart BMS CL 12/100 kit with 50cm BMS to battery cables.