Mazda Bongo Voltage Sensing Split Charge Relay Kit
  • Mazda Bongo Voltage Sensing Split Charge Relay Kit

Mazda Bongo Voltage Sensing Split Charge Relay Kit With Changeover Loom

£79.99

Add a leisure battery to your Mazda Bongo.

        100A fused, intelligent voltage sensing, ready-made split charge kit

        Pre-made leisure battery positive and negative leads with terminals

        6 way wired fuse box

        Change over loom to transfer the interior lights, electric blind, 12V sockets and radio over to your leisure battery

        Clear, concise fitting instructions supplied (viewable in the attachments section below).

Quantity

Heavy Duty 100 amp voltage sensing split charge kit made to measure for your Bongo/Freda

 

Add a leisure battery to your Mazda Bongo.

 

 

        Made to measure to allow for neat routing of cable from the main off-side engine battery to the spare battery tray on the near-side.

Allows the leisure battery to be charged only when the engine is running, so you will avoid flattening your main engine battery.

        Clear, concise fitting instructions supplied (viewable in the attachments section above).

 

Kit Contents

Within this kit, you will receive;

 

·                 100A, Fused, intelligent voltage sensing, ready-made split charge kit (1.8M length).

·                 Pre-made Leisure battery Positive & Negative leads and terminals

·                 6 way wired fuse box

·                 Change over loom to transfer the interior lights, electric blinds, 12v sockets and radio over onto your leisure battery.

·                 Fitting instructions

 

 

Product description

 

This kit will stop your leisure battery use draining the main vehicle battery, and also allow you to charge your leisure battery from the alternator whilst the engine is running.

 

The wiring kit for the split charge is made with 16mm2 cables, fused to 100A.

 

The solid state relay will close, allowing the current to flow between the two batteries, when one of the batteries is charging (above 13.7V) and it will disconnect the two batteries when the voltage drops below 12.8V.

 

The VSR relay, comes with mounting screws to secure it firmly near the leisure battery.

 

Professional quality insulated joints throughout the system. 

 

Only very basic tools required to fit.

56

Download

Bongo VSR Instructions

Mazda Bongo voltage sensing split charge kit with changeover wiring loom fitting instructions.

Download (530.93k)